beautypg.com

Fois-1, Fois-1 fiber optic integrating sphere, Application tips – Ocean Optics S2000 User Manual

Page 82: Operation, Specifications

background image

FOIS-1 Fiber Optic Integrating Sphere

The FOIS-1 F

IBER

O

PTIC

I

NTEGRATING

S

PHERE

is a sampling optic that accepts light energy through its 0.375"

input port and funnels it to an optical fiber for emission experiments -- such as measuring the spectral properties
of LEDs and other light sources. The FOIS-1 consists of a 1.5" Spectralon sphere encased in an aluminum
housing, with a 0.375" input port that accepts light energy from 200-1100 nm and a SMA connector for coupling
to the spectrometer.

Application Tips

"

The FOIS-1 is small and compact -- it's just 2.25" x 2.25" x 2.125" and weighs less than 1 pound -- yet is
durable enough for use outside the laboratory.

"

The inside of the FOIS-1 is made from Spectralon, a white diffusing material that provides a highly
lambertian reflecting surface.

Operation

The FOIS-1 is very easy to operate.
1.

Connect an optical fiber (the read fiber) from the FOIS-1's
SMA-terminated output port to the SMA termination of
the spectrometer.

2.

Insert your emission source into the 0.375" black input port of
the FOIS-1. Or, configure your setup so that the emission source
is aligned so that the light energy can enter the input port.

3.

To collect radiation (light) from a 180° field of view, thus
eliminating light collection interface problems inherent to other
sampling devices, make sure that you do not insert your
emission source too deeply into the FOIS-1. If you insert the
emission source into the FOIS-1 to the point where it interferes
with the SMA-terminated output port, you will not collect
radiation from a 180° field of view.

4.

Use the 2 mounting holes for mounting the FOIS-1 to other
components. There is a 1/4"-20 threaded hole and an 8-32
threaded hole.

Specifications

Sampling Optics: FOIS-1

- 82 -

Spectral range:

200-1100 nm

Dimensions:

2.25" x 2.25" x 2.125" (LWH)

Sample port aperture:

0.375"

Sphere coating:

Spectralon

Top cap mounts:

(2) 6-32 threaded holes
(2) 8-32 threaded holes
(1) 1/4"-20 threaded hole in center

Side mounts:

SMA connector for coupling optical fiber to the spectrometer
8-32 threaded holefor 74-OPM Optical Post Mount

Connector:

SMA 905

FOIS-1 mounted onto one arm of the 74-ACH