Continuous strobe rate, H1 header pins (analog) h2 header pins (digital) – Ocean Optics S2000 User Manual
Page 107
Continuous Strobe Rate
The continuous strobe rate is controlled by the A/D converter frequency input to the spectrometer and the position
of a jumper in Jumper Block 3 (labeled JP3 on the S2000 circuit board). The jumper selects a divider for the
input clock.
Appendix D
- 107 -
H1 Header Pins (Analog)
H2 Header Pins (Digital)
Pin
Description
Pin
Description
1
Analog Channel 0
D
N/C
2
Analog Channel 1
C
A/D Trigger
3
Analog Channel 2
B
Digital In 3 (D3)
4
Analog Channel 3
A
S1
5
Analog Channel 4
1
Ground
6
Ground
2
+5 VDC
7
Reserved
3
Phi A/D clock
8
Analog Channel 7
4
Phi Read Out Gate
9
Analog Channel 6
5
Reserved
10
Analog Channel 5
6
Temperature (optional)
7
Read Enable
8
S0
9
Strobe Single flash
10
Strobe Multiple Flash
11
Integration Clock
12
Master Clock
H1 and H2 Header Blocks connect a master unit to
one or more slaves
Jumper
Position
Divisor
DAQ700
Flash Rate
ADC500, SAD500
Flash Rate
ADC1000
Flash Rate
1
Buffered input from D25, pin 20
2
2
10
97.6 Hz
488.0 Hz
976.0 Hz
3
2
12
24.4 Hz
122.0 Hz
244.0 Hz
4
2
14
6.1 Hz
30.5 Hz
61.0 Hz
5
2
16
1.5 Hz
7.6 Hz
15.2 Hz