Specifications – Ocean Optics S2000 User Manual

Page 63

Tighten the set screw on the bottom of the lamp.

Close the two halves without pinching the wires. Replace the two screws at the back of the lamp.

10. Check the lamp output and adjust the focus of the SMA connector, if necessary. See

Appendix B

for

instructions on adjusting the focus of your collimating lens.

Specifications

The useable range of the ISS sampling device is limited to the wavelength range of the spectrometer to
which it is coupled -- i.e., though ISS lens is optimized for use to 2

m, they can be configured to "see" only

to 1100 nm with our spectrometers.

Sampling Chambers: ISS

- 63 -

Path length:

1 cm

Collimating lens:

BK 7 glass (~360 nm - 2

m*), 5 mm diameter, f/2

Collimating lens termination:

SMA 905

Filter slot:

accepts filters up to ¼" (6 mm) in thickness

Base material:

aluminum

Spectral range:

360 nm - 2

Dimensions:

9.0 cm x 5.0 cm x 3.2 cm (LWH)
3.5" x 2.0" x 1.25" (LWH)

Power input:

12 VDC/800 mA, 7-20 VDC/0.5-2 amps

Power output:

6.5 watts

Bulb life:

10,000 hours

Bulb color temperature:

2800K

Output to bulb:

5 volts/1.3 amps

Output regulation:

0.2% voltage

Time to stabilized output:

~ 30 minutes

Bulb output:

7400 foot-candles (7.4MSCP)