Ocean Optics S2000 - Manual (Page 12)

S2000 Specifications
S2000 Miniature Fiber Optic Spectrometers
- 12 -
Absolute Maximum Ratings
V
CC
+ 5.5 VDC
Voltage on any pin V
CC
+ 0.2 VDC
Physical Specifications
Physical dimensions (no enclosure)
5.47” x 3.90” x 0.75” LWH (master only)
139 mm x 99 mm x 19 mm LWH (master only)
Physical dimension (with enclosure)
5.63” x 4.09” x 1.58” LWH (master only)
143 mm x 104 mm x 40 mm LWH (master only)
Weight 200 g (master only, no enclosure)
Power
Power requirement (master) 130 mA at +5 VDC
Power requirement (slave) 70 mA at +5 VDC
Supply voltage 4.5 – 5.5 V
Power-up time 3 msec
Spectrometer
Design asymmetric crossed Czerny-Turner
Focal length (input) 42 mm
Focal length (output)
68 mm (75, 83 and 90 mm focal lengths are also available for some
configurations)
Input fiber connector SMA 905
Gratings 14 different gratings
Entrance slit
5, 10, 25, 50, 100, or 200 µ m slits. (Slits are optional. In the absence
of a slit, the fiber acts as the entrance slit.)
Detector Sony ILX511 CCD
Filters 2
nd
order rejection, long pass (optional)
Spectroscopic
Integration time 3 – 65,000 msec
Dynamic range 2 x 10
8
Signal-to-Noise 250:1 single acquisition
Readout noise (single dark spectrum) 3.5 counts RMS, 20 counts peak-to-peak
Resolution (FWHM) 0.3 – 10.0 nm varies by configuration
Stray light <0.05% at 600 nm; <0.10% at 435 nm
Spectrometer channels 8 (master plus up to 7 slaves)
Environmental Conditions
Temperature -30
°
- +70
°
C Storage; -10
°
- +60
°
C Operation