QTECH QSW-3400 Инструкция по настройке - Manual (Page 66)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
65
3. Configure attributes of the cluster in the commander switch
4. Configure attributes of the cluster in the candidate switch
5. Remote cluster network management
no cluster member {id | mac-
address }
Command Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user Change automatically added members
into manually added ones.
cluster keepalive interval
no cluster keepalive interval
Set the keep-alive interval of the
cluster.
cluster keepalive loss-count
no cluster keepalive loss-count
Set the max number of lost keep-alive
messages that can be tolerated in the
cluster.
Admin mode
clear cluster nodes [nodes-sn
list> | mac-address ]
Clear nodes in the list of candidate
switches maintained by the switch.
Command Explanation
Global Mode
cluster keepalive interval
no cluster keepalive interval
Set the keep-alive interval of the cluster.
cluster keepalive loss-count
no cluster keepalive loss-count
Set the max number of lost keep-alive messages that
can be tolerated in the clusters.
Command Explanation
Admin Mode
rcommand member In the commander switch, this command is used to
configure and manage member switches.
rcommand commander In the member switch, this command is used to
configure the commander switch.