4 mab troubleshooting, Roubleshooting – QTECH QSW-3400 Инструкция по настройке User Manual
Page 373

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
372
Switch(config-if-ethernet1/2)#mac-authentication-bypass enable guest-
vlan 8
Switch(config-if-ethernet1/2)#exit
Switch(config)#interface ethernet 1/3
Switch(config-if-ethernet1/3)#switchport mode access
Switch(config-if-ethernet1/3)#mac-authentication-bypass enable
Switch(config-if-ethernet1/3)#exit
Switch(config)#interface ethernet 1/4
Switch(config-if-ethernet1/4)# switchport mode trunk
48.4 MAB Troubleshooting
If there is any problem happens when using MAB function, please check whether the problem
is caused by the following reasons:
Make sure global and port MAB function are enabled;
Make sure the correct username and password of MAB authentication are used;
Make sure the radius-server configuration is correct.