QTECH QSW-3400 Инструкция по настройке - Manual (Page 36)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
35
no aaa authorization config-commands the login user with VTY (login with Telnet and
SSH). The no command disables this
function. Only enabling this command and
configuring command authorization manner,
it will request to authorize when executing
some command.
authentication securityip
no authentication securityip
Configure the secure IP address to login to
the switch through Telnet: the no command
deletes the authorized Telnet secure address.
authentication securityipv6
no authentication securityipv6
Configure IPv6 security address to login to
the switch through Telnet; the no command
deletes the authorized Telnet security
address.
authentication ip access-class {
std>|}
no authentication ip access-class
Binding standard IP ACL protocol to login with
Telnet/SSH/Web; the no form command will
cancel the binding ACL.
authentication ipv6 access-class {
std>|}
no authentication ipv6 access-class
Binding standard IPv6 ACL protocol to login
with Telnet/SSH/Web; the no form command
will cancel the binding ACL.
authentication line {console | vty | web}
login method1 [method2 …]
no authentication line {console | vty | web}
login
Configure authentication method list with
telnet.
authentication enable method1
[method2 …]
no authentication enable
Configure the enable authentication method
list.
authorization line {console | vty | web} exec
method1 [method2 …]
no authorization line {console | vty | web}
exec
Configure the authorization method list with
telnet.
authorization line vty command <1-15>
{local | radius | tacacs} (none|)
no authorization line vty command <1-15>
Configure command authorization manner
and authorization selection priority of login
user with VTY (login with Telnet and SSH).
The no command recovers to be default
manner.
accounting line {console | vty} command
<1-15> {start-stop | stop-only | none}
Configure the accounting method list.