QTECH QSW-3400 Инструкция по настройке - Manual (Page 237)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
236
1. To enable/disable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To configure DHCPv6 address pool
(1) To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode
ipv6 dhcp pool
no ipv6 dhcp pool
To configure DHCPv6 address pool.
(2) To configure parameter of DHCPv6 address pool
Command Explanation
DHCPv6 address pool Configuration Mode
network-address
address> { |
} [eui-64]
no network-address
To configure the range of IPv6 address
assignable of address pool.
dns-server
no dns-server
To configure DNS server address for DHCPv6
client.
domain-name
no domain-name
To configure DHCPv6 client domain name.
excluded-address
no excluded-address
To exclude IPv6 address which
isn’t used for
dynamic assignment in address pool.
lifetime { | infinity}
{ | infinity}
no lifetime
To configure valid time or preferred time of
DHCPv6 address pool.
3. To enable DHCPv6 server function on port.
Command Explanation
Interface Configuration Mode
ipv6 dhcp server
[preference ] [rapid-commit]
[allow-hint]
no ipv6 dhcp server
To enable DHCPv6 server function on specified
port, and binding the used DHCPv6 address
pool.