QTECH QSW-3400 Инструкция по настройке - Manual (Page 159)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
158
18.8.2 Voice VLAN Configuration
Voice VLAN Configuration Task Sequence:
1. Set the VLAN to Voice VLAN
2. Add a voice equipment to Voice VLAN
3. Enable the Voice VLAN on the port
1. Configure the VLAN to Voice VLAN
2. Add a Voice equipment to a Voice VLAN
3. Enable the Voice VLAN of the port
18.8.3 Typical Applications of the Voice VLAN
Scenario:
A company realizes voice communication through configuring Voice VLAN. IP-phone1 and IP-
phone2 can be connected to any port of the switch, namely normal communication and
interconnected with other switches through the uplink port. IP-phone1 MAC address is 00-1f-
ce-11-22-33, connect port 1/1 of the switch, IP-phone2 MAC address is 00-1f-ce-11-22-55,
connect port 1/2 of the switch.
Command Explanation
Global Mode
voice-vlan vlan
no voice-vlan
Set/cancel the VLAN as a Voice VLAN
Command Explanation
Global Mode
voice-vlan mac mask
mask> priority [name
name>]
no voice-vlan {mac mask
|name |all}
Specify certain voice equipment join/leave
the Voice VLAN
Command Explanation
Port Mode
switchport voice-vlan enable
no switchport voice-vlan enable
Enable/disable the Voice VLAN function on
the port