QTECH QSW-3400 Инструкция по настройке - Manual (Page 408)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
407
3. Show and debug the relating information of ULPP
Command Explanation
Admin mode
show ulpp group [group-id]
Show the configuration information of the
configured ULPP group.
show ulpp flush counter interface Show the statistic information of the flush
control vlan
no control vlan
Configure the sending control VLAN,
no operation restores the default value
1.
protect vlan-reference-instance
no protect vlan-reference-instance
list>
Configure the protection VLANs, the no
operation deletes the protection
VLANs.
flush enable mac
flush disable mac
Enable or disable sending the flush
packets which update MAC address.
flush enable arp
flush disable arp
Enable or disable sending the flush
packets which delete ARP.
flush enable mac-vlan
flush disable mac-vlan
Enable or disable sending the flush
packets of deleting the dynamic unicast
mac according to vlan.
description
no description
Configure or delete ULPP group
description.
Port mode
ulpp control vlan
no ulpp control vlan
Configure the receiving control VLANs,
no operation restores the default value
1.
ulpp flush enable mac
ulpp flush disable mac
Enable or disable receiving the flush
packets which update the MAC
address.
ulpp flush enable arp
ulpp flush disable arp
Enable or disable receiving the flush
packets which delete ARP.
ulpp flush enable mac-vlan
ulpp flush disable mac-vlan
Enable or disable receiving the flush
packets of mac-vlan type.
ulpp group master
no ulpp group master
Configure or delete the master port of
ULPP group.
ulpp group slave
no ulpp group slave
Configure or delete the slave port of
ULPP group.