QTECH QSW-3400 Инструкция по настройке - Manual (Page 257)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
256
2. DHCPv6 relay option basic functions configuration
Command Description
Global mode
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
This command enables the
switch relay to support option 37
and the no form of this command
disables it.
ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
This command enables the
switch relay to support the option
38, the no form of this command
disables it.
ipv6 dhcp relay remote-id delimiter WORD
no ipv6 dhcp relay remote-id delimiter
Configures user configuration
options to generate remote-id.
The no command restores to its
original default configuration, i.e.
enterprise number together with
vlan MAC.
ipv6 dhcp relay subscriber-id select (sp | sv | pv | spv)
delimiter WORD (delimiter WORD |)
no ipv6 dhcp relay subscriber-id select delimiter
Configures user configuration
options to generate subscriber-
id. The no command restores to
its original default configuration,
i.e. vlan name together with port
name.
Layer3 Interface configuration mode
ipv6 dhcp relay remote-id
no ipv6 dhcp relay remote-id
This command is used to set the
form of adding option 37 in
received DHCPv6 request
packets, of which is
the content of remote-id in user-
in user-defined option 38 and it
is a string with a length of less
than 128. The no operation
restores subscriber-id in option
38 to vlan name together with
port name such as
"Vlan2+Ethernet1/2".