QTECH QSW-3400 Инструкция по настройке - Manual (Page 135)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
134
7. Set Hybrid port
8. Disable/Enable VLAN Ingress Rules
9. Configure Private VLAN
10. Set Private VLAN association
11. Specify internal VLAN ID
Port Mode
switchport access vlan
no switchport access vlan
Add the current port to the specified VLAN.
The “no” command restores the default
setting.
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD | all |
add WORD | except WORD | remove WORD}
{tag | untag}
no switchport hybrid allowed vlan
Set/delete the VLAN which is allowed by
Hybrid port with tag or untag mode.
switchport hybrid native vlan
no switchport hybrid native vlan
Set/delete PVID of the port.
Command Explanation
Global Mode
vlan ingress enable
no vlan ingress enable
Enable/Disable VLAN ingress rules.
Command Explanation
VLAN mode
private-vlan {primary | isolated | community}
no private-vlan
Configure current VLAN to Private VLAN.
The no command deletes private VLAN.
Command Explanation
VLAN mode
private-vlan association
list>
no private-vlan association
Set/delete Private VLAN association.