QTECH QSW-3400 Инструкция по настройке - Manual (Page 44)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
43
[access {|}]
[ipv6-access {|
name>}] [read ] [write
]
no snmp-server community
[access {|}] [ipv6-access
{|}]
the no command deletes the configured
community string.
3. Configure IP address of SNMP management station
Command Explanation
Global Mode
snmp-server securityip { |
}
no snmp-server securityip {
address> | }
Configure IPv4/IPv6 security address which is
allowed to access the switch on the NMS; the
no command deletes the configured security
address.
snmp-server securityip enable
snmp-server securityip disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
Global Mode
snmp-server engineid
no snmp-server engineid
Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command Explanation
Global Mode
snmp-server user
string> [{authPriv | authNoPriv} auth {md5
| sha} ] [access {
std>|}] [ipv6-access {
std>|}]
no snmp-server user [access
{|}] [ipv6-access {
num-std>|}]
Add a user to a SNMP group. This command
is used to configure USM for SNMP v3.