QTECH QSW-3400 Инструкция по настройке - Manual (Page 168)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
167
2. Lock the MAC addresses for a port
Command Explanation
Port Mode
switchport port-security lock
no switchport port-security lock
Lock the port, then MAC addresses learned
will be disabled. The
“no switchport port-
security lock” command restores the function.
Notice: This command is not supported by the
switch.
switchport port-security convert Convert dynamic secure MAC addresses
learned by the port to static secure MAC
addresses. Notice: This command is not
supported by the switch.
switchport port-security timeout
no switchport port-security timeout
Enable port locking timer function; t he “no
switchport port- security timeout” restores the
default setting. Notice: This command is not
supported by the switch.
switchport port-security mac-address
no switchport port-security mac-address
Add static secure MAC addr
ess; the “no
switchport port-security mac- address”
command deletes static secure MAC address.
Admin Mode
clear port-security dynamic [address
| interface ]
Clear dynamic MAC addresses learned by the
specified port.
3. MAC address binding property configuration
Command Explanation
Port Mode
switchport port-security maximum
no switchport port-security maximum
Set the maximum number of secure MAC
addresses for a port; the “no switchport port-
security maximum” command restores the
default value.
switchport port-security violation {protect |
shutdown} [recovery <30-3600>]
no switchport port-security violation
Set the violation mode for the port; the “no
switchport port- security violation” command
restores the default setting.