QTECH QSW-3400 Инструкция по настройке - Manual (Page 193)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
192
no mls qos queue algorithm default queue management algorithm is
wrr.
mls qos queue wrr weight
no mls qos queue wrr weight
Set queue weight based a port, the
default queue weight is 1 2 3 4 5 6 7 8.
mls qos queue wdrr weight
no mls qos queue wdrr weight
Configure the queue weight according to
the port. The queue weight is 10 20 40 80
160 320 640 1280 as default.
mls qos queue bandwidth
no mls qos queue bandwidth
Configure the bandwidth pledge
according to the port. The range is kbit/s
and the granularity is 64kbit.
5. Configure QoS mapping
Command Explanation
Global Mode
mls qos map {cos-
intp | cos-
dp
…dp8> | dscp-intp to
| dscp-dp to | dscp-
dscp to }
no mls qos map {cos-intp | cos-dp | dscp-intp |
dscp-dp | dscp-dscp}
Set the priority mapping for QoS, the no
command restores the default mapping
value.
6. Clear accounting data of the specific ports or VLANs
Command Explanation
Admin Mode
clear mls qos statistics [interface
name> | vlan ]
Clear accounting data of the specified
ports or VLAN Policy Map. If there are
no parameters, clear accounting data of
all policy map.
7. Show configuration of QoS
Command Explanation
Admin Mode
show mls qos maps [cos-intp | dscp-intp] Display the configuration of QoS mapping.
show class-map []
Display the classified map information of
QoS.