QTECH QSW-3400 Инструкция по настройке - Manual (Page 227)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
226
no ip dhcp pool operation cancels the DHCP Address pool.
(2) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address
[mask | prefix-length]
no network-address
Configure the address scope that can be
allocated to the address pool. The no operation
of this command cancels the allocation
address pool.
default-router
[[[…]]]
no default-router
Configure default gateway for DHCP clients.
The no operation cancels the default gateway.
dns-server
[[[…]]]
no dns-server
Configure DNS server for DHCP clients. The
no command deletes DNS server
configuration.
domain-name
no domain-name
Configure Domain name for DHCP clients; the
“no domain-name” command deletes the
domain name.
netbios-name-server
[[[…]]]
no netbios-name-server
Configure the address for WINS server. The no
operation cancels the address for server.
netbios-node-type {b-node|h-node|m-
node|p-node|}
no netbios-node-type
Configure node type for DHCP clients. The no
operation cancels the node type for DHCP
clients.
bootfile
no bootfile
Configure the file to be imported for DHCP
clients on boot up. The no command cancels
this operation.
next-server
[[[…]]]
no next-server
[[[…]]]
Configure the address of the server hosting file
for importing. The no command deletes the
address of the server hosting file for importing.
option {ascii | hex
| ipaddress }
no option
Configure the network parameter specified by
the option code. The no command deletes the
network parameter specified by the option
code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no