QTECH QSW-3400 Инструкция по настройке - Manual (Page 400)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
399
53.2 MRPP Configuration Task List
1. Globally enable MRPP
2. Configure MRPP ring
3. Configure the query time of MRPP
4. Configure the compatible mode
5. Display and debug MRPP relevant information
1. Globally enable MRPP
Command Explanation
Global Mode
mrpp enable
no mrpp enable
Globally enable and disable MRPP.
2. Configure MRPP ring
Command Explanation
Global Mode
mrpp ring
no mrpp ring
Create MRPP ring. The
“no” command
deletes MRPP ring and its configuration.
MRPP ring mode
control-vlan
no control-vlan
Configure control VLAN ID, format “no”
deletes configured control VLAN ID.
node-mode {master | transit}
Configure node type of MRPP ring (primary
node or secondary node).
hello-timer < timer>
no hello-timer
Configure Hello packet timer sending from
primary node of MRPP ring, format “no”
restores default timer value.
fail-timer
no fail-timer
Configure Hello packet overtime timer
sending from primary node of MRPP ring,
format “no” restores default timer value.
enable
no enable
Enable MRPP ring, format “no” disables
enabled MRPP ring.
Port mode
mrpp ring primary-port
no mrpp ring primary-port
Specify primary port of MRPP ring.
mrpp ring secondary-port Specify secondary port of MRPP ring.