QTECH QSW-3400 Инструкция по настройке - Manual (Page 433)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
432
3. Appoint the mirror destination, and the destination can be the physical port or the tunnel
Command Explanation
Global Mode
monitor session destination tunnel interface
desmac < MAC address > desIP <
Dest IP address > scrIP < Source IP address
no monitor session destination tunnel
interface
Appoint the mirror destination to
be the physical port or the
tunnel; the no command deletes
the mirror destination.
59.3 Typical Examples of ERSPAN
Before ERSPAN is invented, network administrators had to connect their PCs directly to the
switches, in order to check the status of the network.
However, with the help of ERSPAN, network administrators can configure and supervise the
switches remotely, which brings more efficiency.
In Layer 3 network, Device A connects to the marketing department through Ethernet 1/1, and
connects to Ethernet1/2 of Device B through Ethernet 1/2; Device C connects to the server
through Ethernet 1/2, and connects to Ethernet 1/1 of Device B through Ethernet 1/1. Server is
able to monitor the bidirectional traffic of the marketing department across a GRE tunnel by
configuring remote port mirroring. The figure below shows a sample application of ERSPAN.
ERSPAN application diagram
tunnel
no monitor session
destination tunnel
command deletes the mirror destination tunnel.