Chapter 17 eee energy-saving configuration, 1 introduction to eee energy-saving, 2 eee energy-saving configuration list – QTECH QSW-3400 Инструкция по настройке User Manual
Page 131: 3 eee energy-saving typical examples, Ntroduction to, Nergy, Saving, Saving configuration, Ypical, Xamples
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
130
Chapter 17 EEE Energy-saving Configuration
17.1 Introduction to EEE Energy-saving
eee is Energy Efficient Ethernet. After the port is enabled this function, switch will detect the
port state automatically. If the port is free and there is no data transmission, this port will
change to the power saving mode and it will cut down the power of the port to save the energy.
17.2 EEE Energy-saving configuration List
1. Enable EEE energy-saving function
Command
Explanation
Port Mode
eee enable
no eee enable
Enable the energy-saving function of the port; the no command
disables the energy-saving function of the port.
17.3 EEE Energy-saving Typical Examples
Case: Configure the port 1 of switch as saving mode.
Below is the configuration steps:
Switch(config-if-ethernet1/1)# eee enable