QTECH QSW-3400 Инструкция по настройке - Manual (Page 154)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
153
SwitchA (Config-Ethernet1/1)# swportport hybrid allowed vlan 100
untagged
SwitchB (Config)#mac-vlan mac 00-1f-ce-11-22-33 vlan 100 priority 0
SwitchB (Config)#exit
SwitchB#
SwitchC (Config)#mac-vlan mac 00-1f-ce-11-22-33 vlan 100 priority 0
SwitchC (Config)#exit
SwitchC#
18.6.4 Dynamic VLAN Troubleshooting

On the switch configured with dynamic VLAN, if the two connected equipment (e.g. PC)
are both belongs to the same dynamic VLAN, first communication between the two
equipments may not go through. The solution will be letting the two equipments
positively send data packet to the switch (such as ping), to let the switch learn their
source MAC, then the two equipments will be able to communicate freely within the
dynamic VLAN.
Dynamic VLAN Troubleshooting
18.7 GVRP Configuration
18.7.1 Introduction to GVRP
GVRP, i.e. GARP VLAN Registration Protocol, is an application of GARP (Generic Attribute
Registration Protocol). GARP is mainly used to establish an attribute transmission mechanism
to transmit attributes, so as to ensure protocol entities registering and deregistering the
attribute. According to different transmission attributes, GARP can be divided to many
application protocols, such as GMRP and GVRP. Therefore, GVRP is a protocol which
192.168.1.100/2
4
192.168.1.200/2
4
Ping 192.168.1.100 Ping 192.168.1.200
Dynamic VLAN