QTECH QSW-3400 Инструкция по настройке User Manual
Page 192
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
191
yellow, red) of messages. in-profile
means green, out-profile means red and
yellow.
Policy class map configuration mode
drop
no drop
transmit
no transmit
Drop or transmit the traffic that match the
class, the no command cancels the
assigned action.
3. Apply QoS to port or VLAN interface
Command
Explanation
Interface Configuration Mode
mls qos trust dscp
no mls qos trust dscp
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {
no mls qos cos
Configure the default CoS value of the
port; the no command restores the default
setting.
service-policy input
no service-policy input {
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port or deletes
all the policy maps applied on the ingress
direction of the port . Egress policy map is
not supported yet.
Global Mode
service-policy input
no service-policy input {
vlan
Apply a policy map to the specified VLAN
interface; the no command deletes the
specified policy map applied to the VLAN
interface or deletes all the policy maps
applied in the ingress direction of the vlan
interface .
4. Configure queue management algorithm and weight
Command
Explanation
Global Mode
mls qos queue algorithm {sp | wrr | wdrr}
Set queue management algorithm, the