Rainbow Electronics LM93 - Manual (Page 80)

16.0 Registers
(Continued)
16.9 SLEEP STATE CONTROL AND MASK REGISTERS
16.9.1 Register E4h Sleep State Control
Register
Address
Read/
Write
Register
Name
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Default
Value
E4h R
Sleep State
Control
RES SB 07h
Bit Name R/W Description
1:0 SB R/W Sleep State Control. Setting this field tells the LM93
which sleep state the system is in. Several error
events are masked depending on the state of this
field.
7:2 RES R Reserved
SB Description
00 Sleep state = S0
Do not mask errors.
01 Sleep state = S1
Mask errors according to S1
mask registers and standard S1
masking.
10 Sleep state = S3
Mask errors according to S3
mask registers and standard S3
masking.
11 Sleep state = S4/5
Mask errors according to S4/5
mask registers and standard
S4/5 masking. This mode is
activated automatically if the
RESET input is asserted.
LM93
www.national.com 80