Rainbow Electronics LM93 - Manual (Page 46)

16.0 Registers
(Continued)
16.5.2 Register 49h H_Error Status 2
Register
Address
Read/
Write
Register
Name
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Default
Value
49h RWC
H_Error
Status 2
ADIN8
_ERR
ADIN7
_ERR
ADIN6
_ERR
ADIN5
_ERR
ADIN4
_ERR
ADIN3
_ERR
ADIN2
_ERR
ADIN1
_ERR
00h
Bit Name R/W Description
Sleep
Masking
0 AD1_ERR RWC This bit is set when the AD_IN1 voltage has fallen outside the range defined
by the AD_IN1 Low Limit and the AD_IN1 High Limit registers.
S3, S4/5
1 AD2_ERR RWC This bit is set when the AD_IN2 voltage has fallen outside the range defined
by the AD_IN2 Low Limit and the AD_IN2 High Limit registers.
S3, S4/5
2 AD3_ERR RWC This bit is set when the AD_IN3 voltage has fallen outside the range defined
by the AD_IN3 Low Limit and the AD_IN3 High Limit registers.
S3, S4/5
3 AD4_ERR RWC This bit is set when the AD_IN4 voltage has fallen outside the range defined
by the AD_IN4 Low Limit and the AD_IN4 High Limit registers.
S3, S4/5
4 AD5_ERR RWC This bit is set when the AD_IN5 voltage has fallen outside the range defined
by the AD_IN5 Low Limit and the AD_IN5 High Limit registers.
S3, S4/5
5 AD6_ERR RWC This bit is set when the AD_IN6 voltage has fallen outside the range defined
by the AD_IN6 Low Limit and the AD_IN6 High Limit registers.
S3, S4/5
6 AD7_ERR RWC This bit is set when the AD_IN7 voltage has fallen outside the range defined
by the AD_IN7 Low Limit and the AD_IN7 High Limit registers.
S3, S4/5
7 AD8_ERR RWC This bit is set when the AD_IN8 voltage has fallen outside the range defined
by the AD_IN8 Low Limit and the AD_IN8 High Limit registers.
S3, S4/5
LM93
www.national.com 46