Rainbow Electronics LM93 - Manual (Page 69)

16.0 Registers
(Continued)
16.8.12 Register C7h PROCHOT Time Interval
Register
Address
Read/
Write
Register
Name
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Default
Value
C7h R/W
PROCHOT
Time
Interval
P2_TI P1_TI 11h
Bit Name R/W Description
3:0 P1_TI R/W Sets the monitoring interval for P1_PROCHOT
7:4 P2_TI R/W Sets the monitoring interval for P2_PROCHOT
Possible settings for P1_TI and P2_TI:
P1_TI or P2_TI
Monitoring Time Interval
(seconds)
0h 0.73
1h 1.46
2h 2.9
3h 5.8
4h 11.7
5h 23.3
6h 46.6
7h 93.2
8h 186
9h 372
Ah–Fh Reserved
Note that changing this value while PROCHOT measurements are running may cause the monitoring circuit to produce a
erroneous value. To avoid alerts and invalid B_Px_PROCHOT or B_Px_PROCHOT Error Status values, only change this value
while the chip is programmed for S3 or S4/5.
LM93
www.national.com 69