EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 96)

The element is modified in the playlist and the corresponding information is updated both
in the Control Panel and in the playlist.
Note
If the original record train is still available, clicking the Ret button in the Control
Panel will load the media on the same frame than the loaded clip. This will allow
retrieving media outside the original clip boundaries.
5.8.3. How to Modify a LIVE or Delayed Train
If a live or delayed train is present in the playlist, the user can modify it.
To do so, proceed as follows:
1. Right-click the element corresponding to the train in the playlist grid.
The Playlist Element contextual menu opens.
2. Select Modify LIVE or Delay from the menu.
The Insert LIVE or Delay window is displayed with the information entered for the
selected element.
3. Modify the information for the element.
4. Click the OK button.
The element is modified in the playlist.
5.8.4. How to Split a Playlist Element
A playlist element can be split in two elements. The playlist element may be a growing
clip.
To do so, proceed as follows:
1. Browse the playlist element until the first frame of what will be the second element.
2. Right-click the element to be split in the playlist grid.
The Playlist Element contextual menu is displayed.
3. Select Split Element.
The playlist element is split at the selected timecode. A second element is displayed in
the Playlist grid with the same name as the first one.
The transition between the two elements is automatically set as "Cut".
During playout, depending on the option selected for the When Splitting an Element
setting under Tools > Settings > Playlist > General, the system will stop on the last
frame of the element before the transition or apply an automatic transition between the two
elements. See section "General Settings" on page 142.
82 5. Playlist Editing
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A