EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 173)

The Auxiliary Track Settings category will only be available if the EVS server is configured
in IPDP mode.
The EVS server lists displays all the EVS servers available on the XNet network. The
settings for auxiliary track audio outputs are made for each EVS server being controlled by
IPDirector. Therefore the EVS server must be selected from the list and then have the
settings applied.
The auxiliary track output can be one of the following:
Output Description
On PRV
audio
output The audio track of the auxiliary clip will use the audio outputs normally
assigned to the PRV player channel.
If no PRV channel is available, the auxiliary track will not be assigned to
any audio output.
On PRV
and 7/8 –
15/16
outputs The audio track of the auxiliary clip will use the audio outputs normally
assigned to the PRV channel, if any, plus all the audio outputs from 7-
8/15-16 that have not yet been assigned to another channel.
Use this option if you need an auxiliary track without PRV channel
available.
On PGM
audio
output The audio track of the auxiliary clip will use the audio outputs normally
assigned to the PGM player channel.
IPDirector - Version 6.2 - User Manual - Playlist Panel
8. Playlist Settings 159