EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 117)

The playout of the element will be triggered at the specified time and day and only
at that time even if the playlist remains loaded.
5. Click OK.
If the time information is already defined for another element in the playlist, a popup
window displays an error message.
A clock icon and the time defined for the jump on time condition are displayed in the
playlist grid for the selected element.
If the playlist is loaded on the channel, the element will start playing at the time defined,
using the parameters defined for the element. See section "Jump on Time
Characteristics" on page 98 for special cases of use.
6.4.7. Using Macro Command to Define Still/Start
Mode
Still/Start mode can also be defined by using a macro command, previously configured to
correspond to a specific effect with specific parameters. See section "Applying a Macro
Command to Trigger Playout Effects" on page 116 for information on using macro
commands, and section "Playlist Macro Commands Settings" on page 149 for information
on configuring macro commands.
6.5. Resetting Playout Parameters to
Default
It is possible to reset the following playout parameters to the default values specified in
the Tools > Settings > Playlist > Playlist / Default Transition category:
• speed,
• still mode, start mode,
• A/V effect
for all the selected elements. For more information on the values defined as default
values, See section "Default Transition Settings" on page 145.
Resetting parameters to default can be done in two ways:
IPDirector - Version 6.2 - User Manual - Playlist Panel
6. Playout Effects and Parameters 103