EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 161)

• On GPI : the selected element will be started when a GPI trigger is received on the
corresponding EVS server (the one the playlist is to be played on). The GPI number
and its trigger mode are defined in the Tools > Settings > Input GPIS category.
When On GPI is selected, the corresponding GPI, which has been configured to start
a PLAY command on the on-air channel associated to the Playlist Panel, is displayed
in the description field.
• On Time, at: the element will start at the defined time.
◦ Start only if the element is loaded on the channel: the playout will only be started if
the element is loaded on the channel at the specified time (start-on-time).
◦ Start even if the element is not loaded on the channel: the playout will be started
even if the element is not loaded on the channel as far as the playlist is loaded on
the channel (jump-on-time).
8.5. Audio Swap Settings
8.5.1. Overview
This setting allows the user to set up common audio swap configurations in advance to
facilitate an efficient way of changing configurations when building playlists.
Common configurations can be made, named and added to a list using this set-up area.
Once configurations have been defined they can be selected for use using the Insert/Edit
Tag command from the Playlist Panel contextual menu. See section "Using Action Tags
into a Playlist to Trigger Transport Functions or Playout Effects" on page 107 for more
information on the use of Tags.
IPDirector - Version 6.2 - User Manual - Playlist Panel
8. Playlist Settings 147