EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 140)

2. Select
◦ Exit as soon as possible to be able to exit the loop immediately when clicking
the GoTo Element button
OR
◦ Exit on element markOUT to be able to exit the loop as soon as the OUT point
of the current element is reached after having clicked the GoTo Element button.
The selected option is displayed under the button :
3. Select the playlist element you want to be played when exiting the loop.
4. Click the GoTo Element button to exit the loop according to the selected mode.
The loop is exited and the selected element is then played taking into account its still/start
modes, transition effects, speed, tags.
6.11.7. Modifying a Loop
How to Insert an Element Inside a Full or a Partial Loop
It is still possible to insert elements inside a partial loop after the creation of the loop. You
man also insert elements inside a full loop even when it is playing. To do so, proceed as
follows:
1. Select one or several elements to include in a loop inside the playlist.
2. Drag the element(s) into the playlist grid, between the first and the last elements of the
loop.
The element(s) are inserted within the loop.
How to Remove an Element from a Partial Loop
The user can remove one or several elements from a partial loop.
1. Select one or several elements to remove from the loop.
2. Right-click one of the elements of the selection and select Remove element from the
Playlist Element contextual menu.
A confirmation message will be displayed depending on the status of the playlist being
edited:
If the playlist is off-line:
126 6. Playout Effects and Parameters
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A