EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 67)

4.5.3. How to Jump to a Given Timecode within a
Playlist Element
To jump to a specific timecode within an element, proceed as follows:
1. Select a playlist element.
2. Click in the GoTo Element Timecode button
OR
press key.
The GoTo Element Timecode zone is displayed.
3. Enter the timecode value, corresponding to the point you want the system jumps to.
4. Press ENTER.
The system jumps to the defined timecode in the selected element.
4.5.4. How to Jump to a Remaining Time Value
From the Time until Transition field, it is possible to perform a jump to a defined time
before the OUT point of a selected element. To do so, proceed as follows:
1. Select a playlist element.
2. Click in the Time Until Transition field
OR
press key.
The value displayed is "00:00:00:00".
3. Enter the remaining time duration, corresponding to the point you want the system
jumps to.
4. Press ENTER.
The system jumps to the timecode corresponding to the remaining time duration before
the OUT point.
IPDirector - Version 6.2 - User Manual - Playlist Panel
4. Playlist Management 53