EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 86)

Note
In both cases (insert or append) the element will take the default values defined
for a transition in the Tools > Settings > Playlist > Playlist / Default
Transition category. See section "Default Transition Settings" on page 145 for
more information.
5.3.7. How to Insert a Live or Delayed Record
Train
It is possible to insert a live or delayed record train into a playlist by using the Playlist
Element contextual menu. Train boundaries can either be defined or calculated. The
output boundary can even be unknown.
To do so in a playlist open in a Playlist Panel, proceed as follows:
1. Right-click an element.
The Playlist Element contextual menu is displayed.
2. Select Insert LIVE or DELAY from the menu.
The Insert LIVE or DELAY window opens:
See section "Insert LIVE or DELAY Window" on page 73 for a description of the fields.
3. Select the train in the From Which Feed field.
4. In the IN zone, define the IN point of the inserted train by doing one of the following:
◦ select the Delay radio button and enter a delay value
OR
◦ select the T/C IN radio button and enter a timecode value.
5. In the OUT zone, define the OUT point of the inserted train by doing one of the
following:
◦ select the Unknown radio button.
72 5. Playlist Editing
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A