EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 62)

How to Cue on any Playlist Element
To cue up one particular element of the playlist, proceed in one of the following ways:
• double-click it on the Playlist Panel, if the Disable Double-Click on Playlist option
has not been selected under Settings > Playlist > General
• use one of the ShuttlePRO keys:
Operation ShuttlePRO key
Previous Playlist Element (only in Edit mode)
Next Playlist Element (In Edit or Play modes)
The corresponding element will then be loaded. The playlist will cue up on the first frame
of that element.
How to Load a Playlist Element onto the Control
Panel
To load a playlist element onto the Control Panel, proceed as follows:
1. Open the Control Panel and assign a player to it.
2. Open the Playlist Panel and assign the same player to it.
3. Load a playlist on the Playlist Panel.
4. Drag an element from the playlist onto the Loaded Media field of the Control Panel.
The element will then be loaded on the Control Panel.
The Player field background turns turquoise in both the Control Panel and the Playlist
Panel to highlight this situation.
4.5. Moving through Media
4.5.1. Introduction
The Transport Functions pane provides transport buttons to navigate in the loaded
element. In addition, other options allow to directly jump to a given timecode within the
media.
48 4. Playlist Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A