beautypg.com

Default speed for elements, Default a/v effect parameters, Default still and start mode – EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual User Manual

Page 160: Still mode, Start mode

background image

8.4.2.

Default Speed for Elements

This option is to define the default speed of the elements when they are placed into a
Playlist. The field displays a list of preset values.

If an unknown speed is allocated to a playlist element it will be played out at the speed
defined on the channel when the element comes to air, for example the speed at which the
previous element on-air played at.

8.4.3.

Default A/V Effect Parameters

This area allows the user to define the default audio and video effects of elements added
to the playlist.

As the audio and video effects are linked, selecting a radio button will set to default values
both audio and video effects specified on the right of the selected radio button.

If you select for example the second radio button from the top, you define a cut for the
default video effect, and a mix for the default audio effect.

Select the duration for the video transition effect in seconds and frames. The same
duration will automatically apply to the audio transition effect.

8.4.4.

Default Still and Start Mode

Defines the default stop (still) and start modes of elements added to a playlist.

Still Mode

The still mode setting determines if the playlist should stop on the selected element and if
it should stop where it stops and how it should behave.

The options are:

Stop on first frame of current clip

Stop on last frame of previous clip

Stop on last frame of the previous clip, wait, then jump on first

The playlist will stop on the last frame of the previous clip, then jump on the first frame
of the selected element after a certain time which is defined in the value box.

Start Mode

If a Still mode is defined, one of the following start modes must be defined on the selected
element. If Automatically was already selected when a Still mode is defined, it will be
changed to the Manually option of start mode as the modes are mutually exclusive.

Manually: the selected element must be started manually (by a Play or Play Var
command) on the Playlist Panel, keyboard or ShuttlePRO controller.

146

8. Playlist Settings

EVS Broadcast Equipment S.A. - June 2013

Issue 6.2.A