EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 144)

• at the end of the playlist, except if the loop mode is activated and the start mode
option of the first element is set to Automatically.
• every time a still mode option (Stop on Last, Stop on Last, Wait, Jump on First or
Stop on First) is set on an element.
See section "Define Still/Start Mode Window" on page 99 for more information on these
options.
6.13.2. Activation and Deactivation
Display of the End Cue Area
This END CUE area is only displayed if this has been set under Tools > Settings >
Playlist > Colors. It indicates whether the END CUE mode is activated or not.
If it is activated, the END CUE duration is displayed in the END CUE area and the
background of the zone is green.
If it is not activated, the area displays "END CUE OFF" and the background of the zone is
gray.
How to Activate the END CUE Mode
To activate the END CUE mode, proceed as follows:
1. Associate a player channel to the Playlist Panel.
2. Do one of the following:
◦ right-click the END CUE area and select Activate END CUE in the END CUE
contextual menu or
◦ double-click the END CUE area.
If the END CUE parameters have not already been set for that channel, the Configure
END CUE Parameters window is displayed.
130 6. Playout Effects and Parameters
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A