EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 169)

Link to
Determines the position, in the playlist element, the Audio Swap macro command will be
linked to.
Possible options are:
"Link to" option Description
Current position
(default value) Audio Swap macro command will be linked to the current
position, i.e. the timecode corresponding to the use of the macro
command.
Mark IN Audio Swap macro command will be linked to the IN point of the
element.
Mark OUT Audio Swap macro command will be linked to the OUT point of
the element.
Mix Duration
Displays the mix duration value of the selected pre-defined configuration. This value may
be changed. Limit values are 00s00 to 20s00.
Swap Audio Grid
Displays the Swap Audio grid of the selected pre-defined configuration. This can be
changed by the operator by moving the dots to other intersections.
8.6.7. Action = Effect (Audio and/or Video)
When an Effect action is applied to an element, a transition audio and video effect is
applied. See section "Adding Audio and/or Video Transition Effects" on page 91 for more
information on this effect.
Selecting Effect action in the Playlist Macro Commands Settings displays the Define
Audio/Video Effect window.
IPDirector - Version 6.2 - User Manual - Playlist Panel
8. Playlist Settings 155