EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 157)

8.2.3. Insert Clips at Slo-Mo Speed
When a super slow motion (SLSM) clip is inserted in a playlist, the speed of the SLSM clip
will be taken into account provided that the present setting has been selected and the clip
is added from the IPDirector interface. The speed will be 33% for "SLSM clips 3x" or 50%
for "SLSM clips 2x".
If the setting is not selected, the default speed defined in "Default Transition Settings" on
page 145 is taken into account.
8.2.4. Remaining Time Information
Defines which information will be displayed in the Playlist Panel and on the OSD:
• Time until next break
• Time until next unavailable element
An unavailable element is a playlist element that is not available on the XNet network
and can therefore not be played out. This is either a virtual element, an element on an
off-line server, or an element on-line or off-line on the GigE network.
8.2.5. Define Pre-Roll Duration
Defines the pre-roll duration related to the preview transition.
8.2.6. Start on Time Security Warning
A warning message will be displayed when defining a new start-on-time if it is too close to
another start-on-time.
Defines the period of time below which the warning message will be displayed.
8.2.7. Set New Playlist as Default Playlist
This option makes it possible to set a new playlist as the default playlist. Checking this
option will automatically tick the Set as default playlist check box in the Create a New
Playlist window.
8.2.8. Disable Double-Click on Playlist
By default, double-clicking a playlist element will cue and pause the element, so that it is
ready to be played out.
If you tick this option, double-clicking a playlist element will neither cue this element, nor
stop the playlist while it is being played out.
IPDirector - Version 6.2 - User Manual - Playlist Panel
8. Playlist Settings 143