EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 171)

8.6.9. Action = Default Transition
When a Default Transition action is applied to an element at a given timecode, the playout
parameters are reset to the default values specified in the Tools > Settings > Playlist >
Playlist / Default Transition category.
Selecting Default Transition action in the Playlist Macro Commands Settings does not
display any configuration window as there is no parameter to define.
8.6.10. Action = Freeze
When a Freeze action is applied to an element, a Freeze effect is inserted within the
element. See section "Inserting a Freeze Effect in a Playlist Element" on page 104 for
more information on this effect.
Selecting Freeze action in the Playlist Macro Commands Settings displays the Freeze
window:
IPDirector - Version 6.2 - User Manual - Playlist Panel
8. Playlist Settings 157