EVS IPDirector Version 6.2 - June 2013 PLAYLIST PANEL User Manual - Manual (Page 80)

3. In the Mode area, select one of the following radio buttons:
◦ Do not generate T/C: this is used to de-activate the regenerate function.
All the other options become dimmed and unavailable.
◦ Continuous on the whole playlist:
All the options in the Initial T/C Value area become available as well as the
Generate in fields.
◦ Continuous per clip:
All the options in the Initial T/C Value area become available, except the "from
user defined value" option. The Generate in fields become available as well.
4. In the Initial T/C Value area, select one of the options available, depending on what
has been selected in the Mode area:
◦ From user defined value
The value defined in the general playlist setting Default TC Track Value is filled
in by default. You can also enter another T/C value which will be used as initial
value.
◦ From LTC IN
◦ From USER T/C IN
5. Select a value in the Generate in fields.
The values displayed and the availability of the Generate in drop-down lists depends
on the option selected in the Mode area and on the video standard, as detailed below.
6. Click OK.
The parameters are saved with the playlist.
When the playlist is loaded on the EVS video server and played out to air, the timecode is
regenerated as specified.
66 4. Playlist Management
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A