EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 87)

Available Copy Actions
The basic principle is that only copies to the local EVS server are possible, whereas
copies to a distant EVS server are not supported.
The following table provides an overview on the copy actions available from the Remote
Panel and from the VGA interface. The playlists are copied to an empty playlist position:
L = local playlist/position
D = distant playlist
Remote Panel VGA Interface
L to L D to L L to L D to L
EDL Copy
Yes Yes
Yes
Yes
EDL+Clips Copy (short or long) No
In the Remote Panel Interface
To copy a playlist, proceed as follows:
1. Go to the source playlist bank (local or from another machine on the network).
2. Select the original playlist to copy by pressing the corresponding F_ key.
3. Go to the destination playlist bank.
4. Select an empty playlist location.
A new menu appears on the LCD display of the Remote Panel, with the corresponding
message on the OSD of the output monitors, asking whether you want to copy the
original playlist to the new location or whether you simply want to select a new, empty
playlist (default choice):
Select New Playlist 13 ?
[Menu]: Cancel
[Enter]: Confirm
COPY NEW PLST
5. Press COPY (A key) to select the copy option. The menu becomes:
Copy Playlist 11/03
to Playlist 13 ?
[Menu]: Cancel
[Enter]: Confirm
COPY PLST+CLP NEW PLST
OPERATION MANUAL XSense 11.02
5. Playlist Management 79