EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 32)

PgmSpd / VarMax
Aud.Met. PgmSpd PostRoll
Mix. Sw to IN Search Pref
Pressing PgmSpd once enables the Program Speed mode and highlights this function on
the LCD. The PLAY key is flashing red while the PgmSpd mode is enabled.
• Program Speed mode: In this mode, only the speed values defined in the
Operational Setup menu (p.9.1 F3) is available in playback.
• VarMax mode: this mode is not available.
Sw To In
Aud.Met. PgmSpd PostRoll
Mix. Sw to IN Search Pref
When this function is enabled (highlighted), a camera change will cause a jump to the
corresponding IN point if existing. It will switch in Sync if no IN point exists for the current
element, or if Sw to IN is 'OFF'.
See section "Synchronization Mode (Switch To In)" on page 30 for more information on
this option.
Pref
Aud.Met. PgmSpd PostRoll
Mix. Sw to IN Search Pref
Selecting this function enables the Preference mode.
See section "Preference Mode (PREF)" on page 30 for more inforamtion on this option.
Aud.Met.
Aud.Met. PgmSpd PostRoll
Mix. Sw to IN Search Pref
This option enables/disables the display of audio meters for all channels using the OSD of
the output monitors.
24 3. Control Modes
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013