EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 81)

Display Depending on the Load Playlist Setting
When the Load Playlist parameter is set to ‘Conditional’ in the Operational Setup menu on
the Remote Panel (P3.3 F2), the information displayed on the VGA Playlist Screen will
differ depending on whether a playlist is loaded on the PGM1 or not:
If a playlist is loaded on the PGM1:
• All the information displayed on the Playlist Screen refers to the loaded playlist.
• The PLAY, SKIP, NEXT and RECUE commands are displayed on the blue-
highlighted section at the bottom of the page.
If no playlist is loaded on the PGM1:
• The information displayed on the Playlist screen refers to the current playlist, except
the remaining time, which is not displayed.
• The PLAY, SKIP, NEXT and RECUE commands are NOT displayed on the blue-
highlighted section at the bottom of the page.
5.4.2. VGA Playlist Bank Screen
Pressing END on the keyboard when the Clip screen is displayed allows the users to
access the VGA Playlist Bank screen on the given page. This gives an overview on the
playlists and timelines stored on the bank.
OPERATION MANUAL XSense 11.02
5. Playlist Management 73