EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 74)

5. Playlist Management
5.1. Introduction
Playlist Creation
Playlists can be created on the server:
• via the Xsense Remote Panel and/or the Multicam user interface. The playlists are
using specific banks on each page that can be accessed directly without requiring a
dedicated creation step (please refer to "Setting and Loading Playlists" on page 75).
• by means of the Playlist Panel application in IPDirector.
• via external protocols.
Limitation on Playlist and Timeline Elements
• A playlist can include up to 1000 elements.
• Up to 16000 playlist elements can be saved on a server.
• The temporary playlist elements, available for undo and redo actions, are stored on the
server and are purged each time the Multicam application is closed.
Playlist Location
All playlists created are automatically stored on the banks dedicated to playlists and
timelines on the server, i.e. the bank 10 of each page.
Playlists on page 10 are not available from the EVS Remote Panel. These playlists are
reserved for external protocols (Odetics, Louth VDCP, EVS AVSP).
Refreshing the Playlist Information
Playlist information is not permanently refreshed on the network. The playlist information
for a remote playlist bank is only transferred when entering that bank. If you are already
connected to a remote playlist bank, you need to press SHIFT+F10 again to refresh the
playlist information for this bank.
66 5. Playlist Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013