EVS XSense Version 11.02 - July 2013 Operating Manual User Manual
Page 47
Ranking (***)
Push
Aux Clip
PostRoll
>Archive
***
Name
Cam
The Ranking function allows assigning a ranking to the current clip. Pressing several
times this key will scroll through the different values: 0 (***, not highlighted).
Depending on the mode selected with the D key (CLIP/CAM), this ranking is assigned
only to the camera angles of the clip loaded on the controlled channels (CAM mode), or to
all camera angles of the clip (CLIP mode).
If the Keyword info parameter of the Operational Setup menu (p.1.1 F2) is set to “Yes”, the
ranking will appear on the OSD of the output monitors when cueing up the clip.
Name
Push
Aux Clip
PostRoll
>Archive
***
Name
Cam
The Name function is only available if a keyword file is selected in the Setup menu. It is
used to name a clip based on available keywords. "Keyword Management" on page 145
for more details. When the Name function is selected, pressing SHIFT+C again will call
the Search function.
Search
The Search function is “hidden” behind the Name function. Press SHIFT+C again in
Name mode to call it. It allows the operator to search the database for clips based on
keywords and ranking. "Keyword Management" on page 145 for more details.
PostRoll
Push
Aux Clip
PostRoll
>Archive
***
Name
Cam
Clip/Cam
Push
Aux Clip
PostRoll
>Archive
***
Name
Cam
Pressing the D key will toggle between CAM and CLIP modes on the remote. Please note
that this mode on the remote and on the VGA screens is never synchronized.
•
In CAM mode, the Push, Archive, Ranking assignment, Keyword assignment, and
Name functions will apply only to the camera angles of the clip loaded on the
controlled channels.
•
In CLIP mode, these functions will apply on all camera angles of the clip.
OPERATION MANUAL XSense 11.02
4. Clip Management
39