EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 105)

5.7.2. Adding Transition Effects in a Playlist
Transition Effects Commands
The functions related to transition effects are available from the main menu of the Playlist
Edit mode, and the effects applied are also displayed on the Remote Panel display:
How to Add a Transition Effect
You can add transitions on one or all elements of a playlist as follows, or more precisely
modify the default effect applied (mix):
1. Select the playlist location and press PLST to open it in Playlist Edit mode. The main
menu appears:
Effect Edit All
Insert Speed FX Dur Delete
2. Browse to the playlist element at the beginning of which you want to modify the effect
or press Edit All (SHIFT+D) to modify the effect on all playlist elements.
3. To modify the effect, press Effect (SHIFT+C) and use the jog until the requested
effect is displayed on the LCD display.
The effect type is displayed as a letter/symbol in the information corresponding to the
loaded element (see highlighted letter):
111A/04 Clipname012 00:00:29 Unk W00:10
OPERATION MANUAL XSense 11.02
5. Playlist Management 97