EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 24)

TAKE
• In PGM+PRV mode, pressing this button swaps cameras on PGM and PRV monitors
• In Multi-PGM mode, pressing this button toggles between CAM selection and PGM
selection modes.
• In 2 PGM mode, when both PGMs are selected on the Remote Panel, pressing this
button swaps the content loaded on PGM1 with the one loaded on PGM2 and vice-
versa.
• In Playlist Edit mode, pressing this button inserts the clip loaded on the PRV channel
into current playlist.
2.3.4. Function of the Operational Block 2 Keys
Network
This function gives access to the clips and/or records trains of other machines on the
network. After the selection of the machine, the way of selecting clips and camera angles
is similar to clips selection on the local EVS server. "Operation on XNet Network" on page
162.
PLAY
This function initiates a forward motion. It can also be used to start playback of playlists
and clips (refer to PLST command).
When PgmSpd is OFF, the default playback speed when pressing the PLAY key is 100%
for standard pictures, 33% for Super Motion pictures with a Triple Speed camera (SD),
and 50% for Super Motion pictures with a Double Speed camera (HD),.
When PgmSpd is ON, the value defined in the Operational Setup menu for the PGM
Speed/Var max parameter (p.9.1 F3) is used.
Note
The Var Max option is not available with Xsense.
16 2. Working Interfaces
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013