EVS XSense Version 11.02 - July 2013 Operating Manual User Manual

Page 159

Assigning Keywords in List Mode

To assign keywords to a clip in list mode, recall the clip, then press MENU to access the
secondary clip menu on the Remote Panel.

player_B10123

action_

689012

keyword8901

F1:action_1 F6:action_6

F2:action_2 F7:action_7

111A

F3:action_3 F8:action_8

F4:action_4 F9:Prev.page p.01

F5:action_5 F0:Next page

Push

Aux Clip

PostRoll

>Archive

***

Name

Cam

The LCD displays a page containing 8 keywords. Press F9/F10 to access the
previous/next keywords page. To assign a keyword to the current clip, press the F_ key
corresponding to the desired keyword on the LCD display.

Depending on the CLIP/CAM mode defined by the D key, the selected keyword will be
assigned only to the camera angles loaded on the channels fully controlled by the operator
at that time (CAM mode), or to all camera angles of the clip (CLIP mode). The keyword
will be assigned to the first available keyword location on the 1

line of the LCD display.

If the Keyword Info parameter of the Operational Setup menu (P.1.1 F2) is set to “Yes”, it
will also appear on the OSD of the corresponding output monitors if the current picture is
the Short IN point of the clip.

If all three keywords locations are occupied, the operator has to clear some of them to be
able to assign a new keyword to that clip.

To clear one of the keywords already assigned, press CLEAR+F1 / F2 / F3 in the
secondary clip menu.

The clip can also be named based on the keywords. Press the Name function (C key) in
the secondary menu, then select keywords. The keywords will be added to the name of
the clip, up to 12 characters. In this mode, the name of the clip is visible on the OSD. It
can also be edited with the following keys:

•

CLEAR: erases the last character

•

SHIFT+CLEAR: inserts a blank

•

SHIFT+F1-F10: inserts a number (1, 2, 3, …, 8, 9, 0)

Once the name is complete, press ENTER to validate or MENU to cancel.

While the operator is in the secondary menu, he has full control of the current clip with the
PLAY key and jog dial, so he can browse the clip and start a replay at any time.

It is also possible to assign keywords and ranking to a clip before it is created. Indeed,
when a record train is loaded, as soon as the operator marks an IN or OUT point, the main
and secondary menu changes to make the Keyword functions available.

OPERATION MANUAL XSense 11.02

7. Keyword Management

151