Changing the primary camera of a clip – EVS XSense Version 11.02 - July 2013 Operating Manual User Manual

Page 73

In the VGA Interface

1. In the Clip window, highlight the clip and press the CTRL+DELETE keys.

2. When the confirmation dialog box opens, press ENTER to confirm that you cancel the

copy. Otherwise, press ESC.

If the Copy Clip option copies several cams of the same clip and some of them have
already been copied before the Cancel function, the Cancel does not delete the copied
files, it just cancels the cam(s) that are still copying or to be copied of that clip. It does not
cancel the copying of other clips.

The Cancel function remains possible even if the page where the clip is being copied is
protected.

4.4.9.

Changing the Primary Camera of a Clip

You can change the primary camera of a clip in the VGA interface.

To change the primary camera of a clip, proceed as follows:

1. In the Clip screen, move the cursor to the desired camera.

2. Press F4 on the keyboard or click with the stylus on the corresponding area in the

Function bar.

◦

This camera becomes the new primary camera.

◦

If the selected camera is a secondary camera (indicated by “=”), it becomes the
primary camera and the previous primary camera becomes the secondary
camera.

OPERATION MANUAL XSense 11.02

4. Clip Management