EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 17)

2.2.5. Jog Dial
The jog dial allows the operator to pass into Search mode and thus to choose exactly the
Short OUT or Short IN image.
Move the jog dial clockwise to search forward and move it counter-clockwise to search
backwards. One revolution of the jog dial will produce a jump of approximately 35 frames.
When using the Fast mode, this number is multiplied by a factor defined in the Setup
menu.
Note
The jog dial is also used to:
• Set parameters in the Setup menu.
• Browse inside the clip database, the cue points or the current playlist. Refer
to the explanation of the Browse function for more details.
The jog dial is active at all times when the system is in Play and Record modes.
2.2.6. Keyboard Locking
You can lock a remote keyboard at any time to protect it against accidental changes, for
example to prevent interruption of a play operation on an unattended device. Only the
locked device is affected, other remotes will stay fully operational.
How to Lock a Remote Panel
To lock a remote, press the CLEAR key. Then, within 2 seconds, press the MENU key
on the keyboard.
The following confirmation message is displayed:
███████████████████████████████████████
Do you really want to lock this remote?
[Menu] : Cancel
[Enter]: Confirm
███████████████████████████████████████
OPERATION MANUAL XSense 11.02
2. Working Interfaces 9