EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 37)

Practical example
The operator builds a playlist with Fills and another playlist with Keys. He sets the Playlist
Load parameter to Conditional in the setup menu, then enters the 2 PGM mode, selects
the Fills playlist as current playlist, presses A to gain control on PGM1, presses PLST two
or three times to enter the PLST DIFF mode and cue up the Fills playlist to its 1st clip.
Then he presses the TAKE key to return to the PGM selection menu, selects the Keys
playlist as current playlist, presses B to gain control on PGM2, presses PLST two or three
times to enter the PLST DIFF mode and cue up the Keys playlist to its 1st clip. Then he
presses the TAKE key to return to the PGM selection menu, presses D to gain control on
both PGM channels, then presses TAKE to enter the PLST DIFF menu. He will see the
content of both playlists side by side on the LCD screen, and can browse them or play
them in Sync at any speed, and perform SKIP and NEXT commands as needed.
3.3.3. Multi PGM Secondary Menu Controls
The secondary menu can be called by pressing the MENU key and is similar to the
1PGM+PRV mode, except that the A function is empty since it is not possible to create a
transition between the channels in this mode.
See section "1PGM+PRV Secondary Menu Controls" on page 23 for a description of the
other functions of the secondary menu.
OPERATION MANUAL XSense 11.02
3. Control Modes 29