EVS XSense Version 11.02 - July 2013 Operating Manual - Manual (Page 178)

9. Advanced Control Modes
9.1. Video Delay
When the Multicam software has been configured with a base configuration = Video Delay
in the Channel Parameters menu, the Delay Screen will appear automatically when the
application is started. In this case, all play channels will be available from the Delay
screen.
If Multicam is running a base configuration different than Video Delay, this screen can be
called manually from the Clip screen, Playlist Screen or Network Screen by pressing
SHIFT+F7 on the keyboard. In this case, only the play channels assigned to user #1.
For each play channel, the operator can adjust:
• the video and audio source (camera angle, and source server if several units are
connected on an SDTI network);
• the desired delay in hh:mm:ss:fr.
For each play channel, the operator can view:
• the actual delay in hh:mm:ss:fr;
• the timecode of the on-air picture
• the timecode of the incoming picture on the associated record channel;
• the status of the associated record channel (Recording / Idle)
170 9. Advanced Control Modes
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013